Table of Contents
Advertisement
Console Management
•
Management Restart VLAN ID Specifies which VLAN the
system Network Management Unit will join after the next
switch restart.
Note: To save changes in this menu, select SAVE before exiting.
Switch Port Control/Status
The switch Port Control/Status Menu is used to individually
configure the Switch's ports.
Figure 5.15 Switch Port Control/Status Menu
The current port settings are listed on the left, under the Port Status
heading. The configurable settings are listed on the right, under the
Port State heading.
Note: Once a port is configured, select SAVE and press Enter
before configuring the next port.
Switch Port Control/Status Menu Settings
5-17
Advertisement
Table of Contents
