Table of Contents
Advertisement
Mini-Console
SYS INFO
MAIN MENU
Observing Utilization
The network manager may want to see the traffic load for every segment and
try to balance the load. It is easy to do so with Switch WSW-2620 by
selecting the UTILIZATION item, the system startup default. While the item
is selected, the level of Utilization for the enabled ports goes up and down as
the traffic load varies.
The reference for the level of utilization is based on the speed of the port that
is running. For example, a port that is running in 10M half duplex, the 100%
stands for the bandwidth of 10M. The following table shows the relation for
each speed:
SPEED
10M half duplex
10M full duplex
100M half duplex
100M full duplex
Pressing Enter will scroll through
the Switch's setting information.
Pressing any key will return you to
the SYS INFO menu.
Table 3.9 Unit Configuration
Observing Utilization
100% Stands for:
10M
20M
100M
200M
Table 3.10 Port Speed
3-13
WSW-2620 User Guide
Advertisement
Table of Contents
