Navigating The Console Program Screens - Planet WSW-2620 Manual

Setting-Up for Management
Note: If the Switch was already powered up when HyperTerminal was
started, then the screen will be blank because the Switch's Power
On Self Test will have run already. Therefore, the screen needs to
be refreshed in order for the Login Screen to appear. Press CTRL
+ R to refresh the screen.
Navigating the Console Program
Screens
Use the following keyboard keys to navigate through the menu and select a
sub-menu. These keyboard commands are common to all menus.
TAB KEY:
ENTER KEY:
EXIT:
HELP:
Power On Self Test
Use the TAB key to select screen menus.
Press the ENTER key after selecting a menu item
with the TAB key to view the selection's sub-
menu.
Return to the previous menu.
Select HELP to view keyboard commands.
4-7