4-2
Connecting a PC via Console Port.
Note: Do not use a null modem cable.
Terminal Program
A Terminal Program is required to communicate with The Switch's internal
software. An MSDOS based program such as PC-PLUS can make the
connection with the device's built-in software. The COM port should be
configured as:
Baud: 9600
Parity: None
Data bits: 8
Stop bits: 1
Flow control: None
Windows95 provides a suitable program called HyperTerminal and is
accessed from the Start menu. Click START, then Programs, Accessories
and then HyperTerminal.
Setting-Up for Management