Table of Contents
Advertisement
5-14
Console Management
Figure 5.12 Trap Filter Setup Menu
To have a trap message sent when a trap event occurs, place an "X" before
the function listed. To prevent a trap message from being sent when a trap
event occurs, remove the "X" before the function listed. Select SAVE before
exiting to save the new settings.
Device Control
The Device Control Menu is used to view and or configure the Switch, its
ports and virtual LANs. The switch's ports can be configured without regard
to any actual link ups, managed slaves hubs by contrast must be linked before
they can be configured.
Advertisement
Table of Contents
