Table of Contents
Advertisement
5-24
3. Configure the Group Address (the specified group's MAC
address), VLAN ID, Group Name and Admin Status.
4. Select UPDATE.
5. Select EXIT.
6. Tab to highlight the group's Port Map area. Press Enter.
7. Place an X beside the ports that you want to add. Ports with no
X will not be members of the group.
8. Select SAVE.
9. Select EXIT.
10. Repeat steps 1 through 5 for each group address.
Follow these steps to delete a group address:
1. Select the group address you want to delete.
2. Press Enter.
3. Select DELETE.
4. Press Enter.
5. Select EXIT.
Console Management
Advertisement
Table of Contents
