Management Setup - Planet WSW-2620 Manual

Console Management
Figure 5.3 System Information Menu
The following information settings can be edited and saved to memory by
users that logon with Read/Write privileges.
System Contact
System Name
System Location
To save and write the system information to memory, select SAVE and press
the Enter keyboard key. The new information is written to memory and
permanently stored until it is edited or changed by users with Read/Write
privileges.

Management Setup

The Management Setup Menu has 5 sub-menus for Network configuration
and for configuring the SNMP community and Trap community.
Network Configuration
Management Port
Configuration
SNMP Community Setup
Trap Receiver
Management Capability
Setup
Trap Filter Setup
System Information
Up to 48 alpha numeric characters
Up to 48 alpha numeric characters
Up to 48 alpha numeric characters
Table 5.2 System Information
Management Setup
Set IP, Subnet Mask and Default Gateway
address.
View management port (RS-232)
configuration.
Configure community names and access.
Configure addresses to which trap messages
will be sent.
Enable or Disable Web and Out-of-Band
management.
Configure trap filters
Table 5.3 Management Setup
5-5