Table of Contents
Advertisement
5-12
Console Management
Figure 5.10 Trap Receiver Menu Edit Panel
Type in a name, press the Tab key to move to the IP Address and
enter a valid IP address number, press the Tab key to move to the
Status field and set the status with the Ctrl + S command.
To save the information, highlight the UPDATE command and press
the Enter key. Exit to return to the Trap Manager Community Setup
Menu where the new entry will visible. A valid IP Address must be
entered and the Status set to active in order for packets to be sent to
the trap managers listed.
Management Capability Setup
The Management Capability Setup menu is used to enable or disable
Web-Based management and Out-of-Band management.
Advertisement
Table of Contents
