Table of Contents
Advertisement
Step 3: The switch, shown in the picture below, can now be hung on the
wall.
Make sure the equipment is securely wall-mounted as strong
vibration could cause it to drop or break.
3.3 Grounding the Device
User MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device. EMD (Lightning) DAMAGE IS
NOT COVERED UNDER WARRANTY.
1G/2.5G/10G
9
Earth Ground
10
Reset
1 Place against a wall
2 Hang up
4mm Screw
7
Advertisement
Table of Contents
