Samsung DCS Programming Manual page 88

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
FEATURE DESCRIPTION
INCLUDE VAT When ON, an "Inclusive VAT of" line is printed on Hotel invoices (Hotel appli-
cation).
DSS KEY DPU When ON, pressing a DSS key will pick up a call at the ringing station.
BEGN DGT When ON, and an outside call of more than 16 digits is dialled, then only the
DSP first 16 digits dialled are shown on the keyset display. When OFF, only the
last 16 digits dialled are shown.
ONE TCH Must be set ON in order for keyset users to be able to use one-touch account
FACC code key.
SGR ALL OUT Normally, a group member cannot leave a group unless there is a member
still in the group. If this option is set ON, the last member is also able to leave
the group.
CHAIN FWD If ON, an incoming call forwarded from a station to another station may then
be forwarded to the mailbox of the second station, if the latter is set for 'for-
ward to voice mail'. If this option is OFF, the call may only be forwarded to the
mailbox of the first station.
TRK MONITOR If ON, the system will monitor the trunk supervision signalling. That is, if a dis-
connection signal is received from the exchange, the call will be cleared and
the extension will go back on hook.
VOIP If ON, this allocates a DTMF receiver for a VOIP tandem caller breaking out
MFRALOC on another trunk group.
NTWK If OFF, the call timer in the phone display will not function if the call is from a
AUTOTMR network connection (Q-SIG)
USE EURO If ON, the unit of currency shown in call displays and on SMDR reports will be
Euros (€). (This will also display on Hotel application invoices.)
NO STAFF If ON, no staff codes will be required for Hotel administration. (Hotel applica-
CODE tion.)
PERI UCD SIO If set OFF, periodic UCD report will print to port set as PERI UCD in
If set ON, periodic UCD report will print to port set as PERI UCD in MMC 804.
If there is no PERI UCD port, periodic UCD report will print to port set as UCD
REPT or SMDR/UCD.
AUTO If ON, any room checked out will be automatically flagged with status
CLEANED "Cleaned". (Hotel application.)
DCS / CII
MMC 804
MMC 210 (Page 4 of 5)
MMC PROGRAM
FEBRUARY 2004
816 408/408i iDCS
iDC500
'L' only
iDC500
'L' only
iDC500
'L' only
OS500