Samsung DCS-408 Installation Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Telephone System
  5. DCS-408
  6. Installation manual

Samsung DCS-408 Installation Manual

Digital keyphone system
Hide thumbs Also See for DCS-408:
Table of Contents

Advertisement

Quick Links

See also: Programming Manual , Installation Manual
Product Name
SAMSUNG
DCS-408
DCS-408i
INSTALLATION
MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Samsung DCS-408

Summary of Contents for Samsung DCS-408

  • Page 1 SAMSUNG DCS-408 DCS-408i Product Name INSTALLATION MANUAL...
  • Page 2 Samsung Telecoms reserves the right without prior notice to revise information in this publica- tion for any reason. Samsung Telecoms also reserves the right without prior notice to make changes in design or components of equipment as engineering and manufacturing may warrant.
  • Page 3 TE Jang ..........................(place and date of issue) (name and signature of authorized person) (Representative in the EU) Samsung Electronics Euro QA Lab. Blackbushe Business Park Saxony Way, Yateley, Hampshire GU46 6GG, UK In-Seop Lee / Manager 2000-12-08 IS Lee ..........
  • Page 4 TE Jang ..........................(place and date of issue) (name and signature of authorized person) (Representative in the EU) Samsung Electronics Euro QA Lab. Blackbushe Business Park Saxony Way, Yateley, Hampshire GU46 6GG, UK In-Seop Lee / Manager 2001-06-11 IS Lee ..........
  • Page 5 Intended Use This telephone system is intended to provide the user with voice communication between the system exten- sions and connection to the public switched telephone network by digital or analogue links. The telephone system may be provided with the ability to communicate with local computer networks to pro- vide CTI functions and features.

  • Page 6: Table Of Contents

    Samsung DCS-408 & 408i Keyphone System Installation Manual Chapter 1 Keyphone System Overview......... 1 System Features ....................1 System Overview ....................1 Product Safety Precautions ..................4 Chapter 2 Keyphone System Installation......5 Environment Requirements ...................5 Precautions for Installation..................5 Unpacking the System ...................6 Procedure for Removing Covers................7...

  • Page 7: Chapter 1 Keyphone System Overview

    DCS-408 & 408i Keyphone System Installation Manual The DCS-408/DCS-408i digital keyphone system is designed to be suitable for a small office. Both the DCS-408 and DCS-408i system comprise a baseboard to which eight (8) station lines (four circuits for digital keysets and four lines for analogue telephones) can be con- nected.
  • Page 8 Samsung DCS-408 & 408i Keyphone System Installation Manual System Dimensions Height Width Depth Weight Item (mm) (mm) (mm) (kg) DCS-408/DCS-408i DPIM System Structure System Capacity DCS-408: 4 analogue trunk lines Trunk DCS-408i: 2 BRI lines (4 channels) (BRI2 line (2 channels) can be substituted for...
  • Page 9 Samsung DCS-408 & 408i Keyphone System Installation Manual System Ports (After Removing Side Cover) CO1.2/BRI1 port CO3.4/BRI2 port NOTE: Only the DCS-408i system supports the BRI feature. Rear View of System – 3 –...

  • Page 10: Product Safety Precautions

    Samsung DCS-408 & 408i Keyphone System Installation Manual Product Safety Precautions Precautions on Installation Do not install the unit in a location subject to moisture or wetness. ► May cause a malfunction or shorten the lifespan of components. Do not install the unit in a location near a heat source such as a heater.

  • Page 11: Chapter 2 Keyphone System Installation

    Samsung DCS-408 & 408i Keyphone System Installation Manual This chapter describes the installation procedures for the DCS-408/408i digital keyphone system, including precautions for your safety. Read this chapter carefully before installing the system. Environmental Requirements Temperature: 0°–40°C (32°–104°F) Humidity: Maximum 90% (non-condensing)

  • Page 12: Unpacking The System

    CAUTION: Always use a dedicated, stable AC power supply for the system Unpacking the System Unpack your DCS-408/408i digital keyphone system and check that there is no damage to any item. If you discover any damage, contact your dealer before attempting installation. Also check that you have received the following items (as well as this manual!).

  • Page 13: Procedure For Removing Covers

    Samsung DCS-408 & 408i Keyphone System Installation Manual Procedure for Removing the Covers The system cover comprises a front cover and a side cover. Refer to the diagram below to remove the covers. Removing the Side Cover Viewed from the top, the small cover on the right-hand side is the side cover. A round indent in the side cover is marked PUSH.
  • Page 14 Samsung DCS-408 & 408i Keyphone System Installation Manual DCS-408: Internal View DCS-408i: Internal View Replacing the Covers Replace the front cover by pushing it gently into place and secure it with the four screws you removed. Slide the side cover back into position until the clips engage securely.

  • Page 15: Installation Procedure

    If you attempt to connect a ground with the AC power cord plugged in, you are at serious risk of death or injury. NOTE: The system illustrated in this section is the DCS-408. However, this grounding procedure also applies to the DCS-408i system Connecting an External Ground (Optional) To connect an external ground, if required, follow these steps.
  • Page 16 Samsung DCS-408 & 408i Keyphone System Installation Manual 2. Cut the green cable soldered to the AC INPUT, about 2~3cm (1 inch) from the soldered end. (Fig. 2.) Figure 2 3. Push the green cable out through the rectangular hole located near to the FRG lug (Fig.

  • Page 17: Fixing The System On The Wall (Optional)

    Samsung DCS-408 & 408i Keyphone System Installation Manual solder the ends of the two cables together, or expose sufficient wire on both cables to twist them together tightly (Fig. 4.) Twist wires tightly Externally grounded cable Green cable Figure 4 NOTE: The cable for external grounding is not supplied with your system and should be prepared separately.

  • Page 18: Testing Initial System Operation

    Samsung DCS-408 & 408i Keyphone System Installation Manual 1. Drill three holes in the wall at the positions indicated for the screws using an electric drill. CAUTION: If the wall is made of plaster or brick, or if the building is prefabricated, you should fix a wooden board having a thickness of about 2 cm to the wall and drill the holes in this.

  • Page 19: Installing The Battery

    Installing the Battery Selecting the Battery You need a battery to operate the DCS-408/DCS-408i digital keyphone system if a power failure occurs. The battery required is DC 48V (6AH~40AH). If an excessively large capacity battery is used, this may cause a system breakdown. If the battery capacity is too small, the system may not operate satisfactorily.
  • Page 20 Samsung DCS-408 & 408i Keyphone System Installation Manual How to Install the Battery WARNING Ensure the mains power is switched ON before connecting the battery. Failure to do so may result in severe injury. 1. Connect the red lead of the battery connection cable to the positive (+) terminal of the bat- tery and connect the black lead to the negative (–) terminal.

  • Page 21: Installing Cables

    Samsung DCS-408 & 408i Keyphone System Installation Manual 4. Turn off the AC power switch and check that the system operates normally. 5. Turn on the AC power switch again. NOTE: During a power failure, a battery lasts for a minimum of 4 hours if its capacity is DC 48V/6AH, and for a minimum of 8 hours if its capacity is DC 48V/12AH.
  • Page 22 The cables required for each jack differ according to the type of jacks as follows. BRI1 / BRI2 ports: RJ-45 cable (8-pin, DCS-408i only) CO1.2 / CO3.4 ports: RJ-11 cable (6-pin, DCS-408 only) MISC port: RJ-11 cable (6-pin) DLI / SLI ports: RJ-11 cable (4-pin) NOTE: These cables are not supplied with your system and should be prepared separately.
  • Page 23 Samsung DCS-408 & 408i Keyphone System Installation Manual Modular Jack Pin Arrangement Layout Connect lines according to the following modular jack pin layout. Modular Modular Description Description Jack Number Jack Number 1,2,7,8 Reserved 1,2,7,8 Reserved BRI1 BRI2 (DCS-408i (DCS-408i only)

  • Page 24: Connecting Trunks

    Analogue Trunks for DCS-408 / Digital Trunks for DCS-408i Analogue trunks (Loop Start lines) are connected to the DCS-408 system through 6-pin, RJ- 11 modular jacks. Digital trunks (BRI lines) are connected to the DCS-408i system through 8- pin, RJ-45 modular jacks.

  • Page 25: Connecting Telephones

    MPD/PRS Selection and Installation NOTE: This feature is available on DCS-408 systems only. The DCS-408 system has four analogue trunk interface lines. Each trunk interface line has either a Metering Pulse Detection (MPD) function or a Polarity Reverse Detection (PRS) function as an option.

  • Page 26: System Options

    DCS-408 & 408i Keyphone System Installation Manual Digital Keysets The DCS-408/DCS-408i system provides four ports, DLI1–DLI4, for digital keysets. Connect the digital keyset to one of the DLI ports using a pair of cables such as #24 AWG (0.5mm) or #26 AWG (0.4mm).

  • Page 27: Trunk Line And Station Line Assignment

    Samsung DCS-408 & 408i Keyphone System Installation Manual Music Source Selection A music source selection jumper is located on the baseboard of the system unit. You can se- lect an internal or an external music source using this jumper. As an external music source, you can connect—for example—a CD player or a radio to the MISC port of the system.

  • Page 28: Digital Keyset Programming

    You need to replace system ROM chips when upgrading the system program or fixing bugs in the program. Before replacing the system ROMs, read this section carefully. If there are any problems, or if you are unsure of anything, contact your dealer or the Samsung Technical Support department for advice.
  • Page 29 8. Reconnect the power cable, switch on the power and check that the system is operating correctly. If not, remove the new ROMs, re-install the old ones and contact your dealer or the Samsung Technical Support department for advice. 9. Set the MEM BACK-UP switch to ON if you switched it off in step 3.

  • Page 30: Chapter 3 Connecting Additional Equipment

    You can select an internal music source or an external music source by moving a jumper on the baseboard of the DCS-408/408i system. Various media such as a CD player and a radio can be used as the external music source.

  • Page 31: External Paging

    Samsung DCS-408 & 408i Keyphone System Installation Manual 3. Connect an external music source (such as a CD player or radio) to the music source pins of the MISC port. Refer to the following table showing the arrangement of the modular jack pins for the MISC port.

  • Page 32: Common Bell

    Samsung DCS-408 & 408i Keyphone System Installation Manual Common Bell If you connect a common bell to the general-purpose dry contact pins of the MISC port, the common bell can receive a call signal as if it is one of the stations. You can select a continu- ous bell or an interrupted bell using MMC 204, Common Bell Control.

  • Page 33: Station Message Detail Recording (Smdr)

    Samsung DCS-408 & 408i Keyphone System Installation Manual Station Message Detail Recording (SMDR) Connect a serial printer to the SIO serial port on the system using an RS-232C cable. Use a shielded computer cable longer than 5m. The maximum allowed length of the cable is 15m.

  • Page 34: Computer Telephony (Ctm-Cti)

    Samsung DCS-408 & 408i Keyphone System Installation Manual MMC 804 It is necessary to set the Service Type of the SIO port as ‘PCMMC’ in MMC 804 in order to program the system via a PC. Parameters related to PCMMC and remote programming are also set in MMC 804.

  • Page 35: Voice Mail/Auto Attendant

    If you want to use the automatic door lock release, connect the LOCK port on the DPIM to the door lock release. NOTE: Use only a Samsung 4-line keyset doorphone for this feature, which you can purchase separately. The following table and diagram show the arrangement of pins for the modular jack when connecting a doorphone and door lock release to the DPIM.
  • Page 36 Samsung DCS-408 & 408i Keyphone System Installation Manual DLI port (RJ-45 [4-pin] Modular Jack) Pin number Features NC (not used) DLI1 1 pair modular cables NC (not used) DLI2 NC (not used) DLI3 NC (not used) Pin 6 DLI4 Pin 1...

  • Page 37: Appendix A System Specifications

    Samsung DCS-408 & 408i Keyphone System Installation Manual These specifications apply to both the DCS-408 and DCS-408i digital keyphone system. Power Specifications System Dimensions Height Width Depth Weight Item Specifications Item (mm) (mm) (mm) (kg) 220~240 VAC, DCS-408/ AC Input 50Hz, 1.6A...

  • Page 38: Appendix B Troubleshooting

    If the problem persists after you have taken the steps described here, contact your dealer for advice and refer servicing to qualified service personnel. NOTE: If you are not familiar with using the system, Samsung recommends that you contact your dealer and refer servicing to qualified service personnel even if the problem and suggested actions are listed here.

  • Page 39: Appendix C Glossary

    A port for connecting a digital keyset exclusively for the DCS- (DLI) PORT 408/408i digital keyphone system. A function allowing a user to call the DCS-408 digital keyphone sys- tem from outside and then make a call using the system. When a DISA user makes a call abroad using this function, call charges are billed to the system.
  • Page 40 A function for directly connecting some trunks to particular analogue POWER FAILURE TRANS- telephones when power is interrupted to the DCS-408/408i digital FER (PFT) keyphone system, thereby allowing a call to be made regardless of the status of the system.
  • Page 41 Samsung Telecoms (U.K.) Limited Brookside Business Park, Greengate, Middleton, Manchester M24 1GS...

This manual is also suitable for:

Dcs-408i

Table of Contents