Samsung DCS Programming Manual page 42

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 103
FOR:
Purpose: Changes the answer mode of any keyset. Each keyset can have its answer
mode set to one of the following:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are answered by
pressing the ANS/RLS or SEND key or by lifting the handset.
1. AUTO ANSWER: After giving a short attention tone, the keyset will automatically an-
swer internal calls on the speakerphone*. (When a C.O. line call is transferred to a key-
set set for Auto Answer, the screened part of the call will be auto answered but the key-
set will ring when the transfer is made, unless the user presses the ANS/RLS or SEND
key or lifts the handset.)
2. VOICE ANNOUNCE: The keyset will not ring. After a short attention tone, callers can
make an announcement but the ANS/RLS or SEND key or handset must be used to an-
swer calls.
* To answer C.O. calls automatically on iDCS500 and OS500 systems, also set ON the option
AUTO ANS CO in
ACTION
1. Open programming and select 103
Display shows
2. Dial keyset number (e.g., 205)
OR
Press VOLUME keys to select keyset
and press RIGHT soft key to move cursor
OR
Select all stations
3. Dial 0, 1 or 2 to change ring mode
OR
Press VOLUME keys to select ring mode and
press RIGHT soft key to return to step 2
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALL SYSTEMS
MMC 110.
(see section 1.5.2)
All keysets = RING
Ring frequency default = 5
MMC 111 Keyset Ring Tone
MMC 103 (Page 1 of 1)
SET ANSWER MODE
DISPLAY
[201] ANS MODE
RING MODE
[205] ANS MODE
RING MODE
[ALL] ANS MODE
?
[205] ANS MODE
VOICE ANNOUNCE
MMC PROGRAMS
FEBRUARY 2004