Samsung DCS Programming Manual page 123

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 311
FOR: DCS only
Purpose: Assigns and sets parameters for the serial interface module (SIM). Refer to
Tables 1–12, below.
ACTION
1. Open programming and select 311
Display shows
2. Enter station number connected to SIM (e.g., 257)
from dial keypad
OR
Press VOLUME keys to make selection and press
RIGHT soft key to move cursor
3. Enter desired selection from table 1 (00–10, e.g.
01)
OR
Press VOLUME keys to make selection and press
RIGHT soft key to move cursor
Refer to Table 1 for your selected option and go to
the table indicated (e.g. Table 3) to enter required
value (e.g. 0) using dial keypad or by pressing
VOLUME keys
Press RIGHT soft key to move cursor
4. Repeat step 3 for all required options (00–10 in
Table 1)
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
TABLE 1. SIM PARAMETER
00 SIM TYPE
01 CALL MODE
02 ANS MODE
03 AUTO BAUD
04 DTR CHECK
05 ECHO
06 PROTOCOL
07 SPEED
08 CHAR LENGTH =
09 PARITY
10 STOP BIT
ASSIGN SIM PARAMETER
= Table 2
= Table 3
= Table 4
= Table 5
= Table 6
= Table 7
= Table 8
= Table 9
Table 10
= Table 11
= Table 12
MMC 311 (Page 1 of 2)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
[256] SIM PARA
SIM TYPE :DTE
[257] SIM PARA.
SIM TYPE :DTE
[257] SIM PARA.
CALL MODE:AWITH
[257] SIM PARA.
CALL MODE:MANUAL