Samsung DCS Programming Manual page 267

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 716
FOR:
Purpose: Provides UK Least Cost Routing options.
Caution: Before using this MMC, run
option has been selected (e.g. "UK").
0 NETWORK CODE
1 PIN CODE
2 CCC OPTION
3 STATION PIN NO
ACTION
1. Open programming and select 716
Display shows
2. Dial item number (e.g., 2)
OR
Press VOLUME keys to make selection and press
RIGHT soft key.
3. Dial 0 or 1 for CCC option (e.g., 0)
OR
Press VOLUME keys to make selection and press
RIGHT soft key
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALL SYSTEMS
Provides secondary network access code when the call is routed
to the secondary network. 16 entries maximum (each 10 digits
maximum in length).
Assigns PIN code used when the call is routed to secondary net-
work.
Selects Cost Centre Code (1: NONE or STATION NUMBER)
Assigns individual users to selected PIN codes in the system.
NETWORK CODE:
PIN CODE:
CCC OPTION:
STATION PIN NO.:
MMC 710 LCR Digit Table
MMC 711 LCR Time Table
MMC 712 LCR Route Table
MMC 713 LCR Modify Digit Table
MMC 812 Select Country
MMC 716 (Page 1 of 1)
UK LCR OPTION
MMC 812 to make sure the correct country
DISPLAY
NETWORK CODE
01:1703
CCC OPTION
STATION NUMBER
CCC OPTION
STATION NUMBER
None
None
None
All stations are 1
MMC PROGRAMS
FEBRUARY 2004
USE:CCC