Samsung DCS Programming Manual page 383

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 840
FOR: OS500
Purpose: Sets the parameters for Internet Phones connected to the system.
Parameter
USER ID
USER PSWD
IP ADDRESS
MAC ADDR
SIG PORT
VOICE PORT
IP TYPE
DSP TYPE
PHONE TYPE
REGIST CLR
FRAME CNT
JITTER BUF
TOS FIELD
SW VERSION
SW UPGRADE
ACTION
1. Open programming and select 840
Display shows
2. Dial phone number
OR
Press VOLUME keys to select and press RIGHT
soft key
3. Press VOLUME keys to select option and press
RIGHT soft key
4. Enter data for selected option
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data: See table above
Related Items: None
Description
ID used to confirm new connection of a registered phone.
Password used to confirm new connection of a registered phone.
The IP address of the IP phone.
The hardware address of the IP phone (read only).
Port number used for signalling between IP terminals and the sys-
tem (this is adjusted for traversing firewalls if necessary).
Port number used for voice transmission between IP terminals and
the system (this is adjusted for traversing firewalls if necessary).
Type of IP address (0. PRIVATE, 1. PUBLIC).
G.729A or G.711.
Type of IP phone (0. SAMSUNG, 1. SIP STANDARD).
Deletes the registered IP phone data.
Frame count (1–4 x10MS).
Jitter buffer (1–9 x10MS).
Type of service packets.
Software version (read only).
Software upgrade (read only).
MMC 840 (Page 1 of 1)
IP SET INFORMATION
DISPLAY
[3201] USER ID
3201
[3201] USER ID
3201
MMC PROGRAMS
FEBRUARY 2004
Default
None
None
0.0.0.0
FFFFFFFFFFFF
06000
09000
PRIVATE
G.729A
SAMSUNG
None
4x
9x
00000000
S/W Version
S/W Version