Samsung DCS Programming Manual page 372

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
ACTION
1. Open programming and select 834
Display shows
2. Press RIGHT soft key
Press VOLUME keys to select ENABLE/DISABLE
and press RIGHT soft key
3. Press VOLUME keys to select next option and
press RIGHT soft key
4. Enter required data and press RIGHT soft key
Repeat steps 3–4 for each option as required
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items: See Related Items, below
H.323 FAST SETUP: DISABLE
GW CALL ID: 1234
BILLING TYPE: STANDARD
CALLER ID TYPE: ANI
INCOMING CHANNEL: DISTRIBUTE
DTMF GENERATION: H.245 SIGNAL
FAX SIGNALLING TYPE: T.38
SWITCH TO H.245: ENABLE
DEFAULT DIL: None
SIGNALLING PORT: 10000
STATUS PORT: 20000
WCS PORT: 20010
SIGK ACCESS PORT: 20020
MAKE DEFAULT DB: NO
EARLY H245 MODE: YES
RING BACK TONE: DISABLE
Q931 NO ANS TIME: 090 SEC
ISP TYPE: NORMAL
FACILITY TYPE: NORMAL
MMC 834 (Page 2 of 4)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
H.323 FAST SETUP
ENABLE
H.323 FAST SETUP
ENABLE
GATEWAY CALL ID
1234