Samsung DCS Programming Manual page 65

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 117
FOR: OS500
Purpose: Allows emergency text messages of up to 16 characters to be entered or
changed. Only stations allowed to use text messages in
A station can use up to 10 emergency text messages.
Messages are written using the keypad. Each key press moves the cursor and enters the
selected character.* For example, press the number "6" once to get the letter "M" or the
number "3" twice to get the letter "E." Continue selecting characters from the keypad to
complete your message. Press the programmable
lower case text. (Refer to
* Tip: When the character you want is on the same key as the previous character you typed in,
press the VOLUME Up key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
ACTION
1. Open programming and select 117
Display shows
2. Dial keyset number (e.g., 205)
OR
Press VOLUME keys to select station and press
RIGHT soft key to move cursor
(NOT PERMIT is displayed if the station has not
been selected in MMC 611)
3. Dial the message number (00–10)
OR
Press VOLUME keys to select message and press
RIGHT soft key to move cursor
4. Enter the message using the procedure described
above and press RIGHT soft key to return to step 2
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
section 1.5.2
! : ? .
^ ( ) _
None
MMC 611 Text Message Station
MMC 117 (Page 1 of 1)
TEXT MESSAGE
MMC 611
"A" key
in Part 1 for key descriptions.)
, % $
+ { }
DISPLAY
[201] TXTMSG(01)
Blank Message
[205] TXTMSG(01)
Blank Message
[205] TXTMSG(01)
Blank Message
[205] TXTMSG(01)
PLEASE CALL ME
MMC PROGRAMS
FEBRUARY 2004
can be selected here.
to toggle between upper and
- < >
→
| ; "
/ =
`