Samsung DCS Programming Manual page 125

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 312
FOR: DCS CI
Purpose: Defines whether keysets will:
allow or prevent receipt of CLIP information;
request or restrict sending of CLIP information.
Each station can have the following options:
SND: YES
NO
RCV: YES
NO
If YES is selected for the SND option:
• iDCS and OS500 systems use
sent.
• Other systems display the INFO option to allow you to select the CLIP information.
Select from:
0 CO Tel
1 Extn. Number
2 CO + Extn. No.
3 DID Number.
ACTION
1. Open programming and select 312
Display shows
2. Dial station number (e.g., 205)
OR
Press VOLUME keys to select station and press
RIGHT soft key to move cursor
OR
Select all stations
3. Dial 0 (NO) or 1 (YES) to select RCV option (e.g. 1)
OR
Press VOLUME keys to select option and press
RIGHT soft key to move cursor to SND field
CII 816 408i iDCS100
- request that Caller ID be sent when outgoing call is made.
- request that Caller ID not be sent when outgoing call is made.
- allow display of CLIP data at keyset.
- prevent display of CLIP data at keyset(s).
(Outgoing line number)
(Extension number)
(Outgoing line number + Extension number)
(DDI number)
(see section 1.5.2)
MMC 312 (Page 1 of 2)
iDCS500
MMC 323 to determine what CLIP information is
DISPLAY
[201] ALLOW CLIP
RCV:YES SND:YES
[205] ALLOW CLIP
RCV:YES SND:YES
OR
[ALL] ALLOW CLIP
RCV:YES SND:YES
[205] ALLOW CLIP
RCV:YES SND:YES
MMC PROGRAMS
FEBRUARY 2004
ALLOW CLIP
OS500