Samsung DCS Programming Manual page 142

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 401
FOR:
Purpose: Selects the mode of the C.O. line. If PBX mode is chosen, this allows PBX
access codes to be recognised, thus allowing more complete toll restriction (call barring).
This mode is assigned on a per-trunk basis. If a trunk requires the use of the RECALL
key, it must be set to PBX mode. Options are:
0 CO LINE
1 PBX LINE
ACTION
1. Open programming and select 401
Display shows
2. Dial trunk number (e.g., 704)
OR
Press VOLUME keys to scroll through trunk num-
bers and press RIGHT soft key to move cursor
OR
Select all trunks
3. Dial 1 for PBX or 0 for C.O.
OR
Press VOLUME keys to scroll through options
Press RIGHT soft key to return to step 2
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALL SYSTEMS
(see section 1.5.2)
All trunks C.O. Line
None
MMC 401 (Page 1 of 1)
C.O. / PBX LINE
DISPLAY
[701] PBX LINE
CO LINE
[704] PBX LINE
CO LINE
OR
[ALL] PBX LINE
?
[704] PBX LINE
PBX LINE
MMC PROGRAMS
FEBRUARY 2004