Samsung DCS Programming Manual page 329

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
5. Enter the MMC required and begin programming.
Follow the instructions for that MMC.
Disabling (Closing) Programming Mode
If you wish to immediately close programming mode when you have finished programming:
Return to MMC 800. The display shows that programming is enabled.
Use the VOLUME keys to select DISABLE and press Transfer/TRSF to exit.
If you do not close programming using MMC 800, programming mode will be automatically
disabled if you do not carry out any programming tasks within the time set in the system
timer KMMC LOCK OUT (see
Default Data:
Related Items:
MMC 501, System-Wide
DISABLE (closed)
Passcode=4321
MMC 801 Change Technician Passcode
MMC 800 (Page 2 of 2)
MMC PROGRAMS
Timers).
FEBRUARY 2004