Samsung DCS Programming Manual page 390

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 848
FOR: OS500
Purpose: Allows you to enter IP or MAC addresses of wireless terminals. The address
must be entered before the terminals can be registered. If a terminal having the same IP
address is already registered, the number of the existing terminal is displayed after
'USED:' in the display.
ACTION
1. Open programming and select 848
Display shows
2. Dial 0 to select IP (address) or 1 to select MAC
(address)
OR
Press VOLUME keys to select and press RIGHT
soft key
3. Dial index number of terminal (001–100)
OR
Press VOLUME keys to select and press RIGHT
soft key
4. Enter IP address of terminal
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data: IP address = 0.0.0.0
MAC address = FFFFFFFFFFFF
Related Items: None
MMC 848 (Page 1 of 1)
MMC PROGRAMS
FEBRUARY 2004
WLAN IP/MAC
DISPLAY
IP : 001 USED:
0. 0. 0. 0
IP : 001 USED:
0. 0. 0. 0
IP : 002 USED:
0. 0. 0. 0
IP : 002 USED:
165.213.145.002