Samsung DCS Programming Manual page 248

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 705
FOR:
Purpose: Assigns system speed dialling numbers.
No. of speed dials
Speed dial numbers
Refer to MMC 606, Assign Speed
trunk group access code (e.g. 9) followed by a separator (–) and up to 24 digits to be di-
alled. These dialled digits can be 0–9,
trunk group access number, it will automatically insert the separator.
FEATURE KEYS
"B" Insert a flash code "F"
"C" Insert a pause code "P"
"D" Insert a pulse/tone conversion code "C"
"E" Mask/unmask following digits - shows as "[" or "]"
"F" Toggle to MMC 706 and enter name for speed dial no.
(Refer to section 1.5.2 in Part 1
ACTION
1. Open programming and select 705
Display shows
2. Enter the speed dial required (e.g., 505)
OR
Press VOLUME keys to make selection and
press RIGHT soft key to move cursor
3. Enter access code (e.g., 9) plus the phone number
up to 24 digits (digits will scroll under)
4. Press "F" key to toggle to
enter a speed name for this number
OR
Press RIGHT soft key to return to step 2 to enter
another speed dial number
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ASSIGN SYSTEM SPEED DIAL
ALL SYSTEMS
DCS / CII 816
500 300
500–999 500–799
Block. Each speed dial number consists of a trunk or
for a description of feature keys.)
MMC 706
None
MMC 606 Assign Speed Block
MMC 706 System Speed Dial By Name
MMC 705 (Page 1 of 1)
408/408i iDCS
200 500
500–699 500–999
and #. If the system recognises a valid trunk or
DISPLAY
SYS SPEED DIAL
500:
SYS SPEED DIAL
505:
SYS SPEED DIAL
505:9–121223456789
(step 3) to
SYS SPEED NAME
505:_
MMC PROGRAMS
FEBRUARY 2004
OS500
500 950
500–999 050–999