Samsung DCS Programming Manual page 107

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 224
FOR:
iDCS500
Purpose: Designed to enhance the Wake-Up (alarm) feature. The feature requires that an
Automated Attendant (AA) card be installed in the system if a wake-up message is to be
programmed. The system can be programmed to play the recorded message when a guest
answers a wake-up call. The system accesses the message selected in this MMC: it can be
one of the customized messages (01-48) recorded on the AA card, or one of the pre-
recorded ROM messages (49-64).
There are three options.
AA GROUP
MESSAGE NO
GROUP BUSY
Note: This feature can be accessed without an AA card installed. However, rather than providing a
wake-up message, you can play only music-on-hold (MOH) as a wake-up announcement. In this
case, you should select MOH as the source in the Group Busy option. Assign an AA Group (with no
members) and enter any Message No.
ACTION
1. Open programming and select 224
Display shows
2. Press RIGHT soft key to move cursor
Enter group number (e.g. 520)
OR
Press VOLUME keys to select and press RIGHT
soft key
3. Press RIGHT soft key to move cursor
Enter message number 01–64 (e.g. 01)
OR
Press VOLUME keys to select and press RIGHT
soft key
WAKE-UP ANNOUNCEMENT
OS500
Determines which AA group will be connected when a Wake-Up call is
answered.
Determines which message will be played when a Wake-Up call is an-
swered. Can be a custom-recorded message, 01-48, or one of the pre-
recorded messages, 49-64.
Determines which tone source will be connected when all AA group
members are busy. This destination can be NONE, TONE or external
music-on-hold. If NONE is set, dial tone is connected; if TONE is set,
hold tone is connected.
MMC 224 (Page 1 of 2)
Hotel application only
DISPLAY
WAKE-UP ANNOUNCE
AA GROUP
WAKE-UP ANNOUNCE
AA GROUP
WAKE-UP ANNOUNCE
MESSAGE NO :NONE
WAKE-UP ANNOUNCE
MESSAGE NO :01
WAKE-UP ANNOUNCE
GROUP BUSY :NONE
MMC PROGRAMS
FEBRUARY 2004
:NONE
:520