Table of Contents
Advertisement
4.3
Settings (THR Mode Operation)
THR mode must be entered for setting the threshold for Portable Power Monitor alarm
output.
Set the upper limit of the integrated power consumption for the threshold value.
If the measured value exceeds the set upper limit value during RUN operation, the station's
alarm output terminal turns ON and the "ALM" indication on the display turns ON.
Note
・An alarm is not output when the measurement mode (MODE) is set to "SLEEP".
・Alarm monitoring cannot be stopped.
However, it can be avoided by setting the threshold value to "0". The factory default is set
to the value (0) in which alarm monitoring is not performed.
4.3.1 Setting Item List
The table below shows the THR mode setting item list.
Display
Item
INT H
INT H
Display
Setting Item
Upper limit threshold
of kWh or higher
integrated power
Upper limit threshold
of less than kWh
integrated power
4. Setting the Unit (Unit Operation)
Function/Operation
Specifies the integrated
power
threshold value for alarm
output (kWh or higher).
Specifies the integrated
power
threshold value for alarm
output (less than kWh).
4-23
Factory
Default
upper
limit
0 kWh
upper
limit
0 Wh
Advertisement
Table of Contents
