Precautions For Correct Use; Storage, Installation And Mounting; Wiring; Actual Operation And Operation - Omron NYM15W-C100 User Manual

Industrial monitor ny-series
Hide thumbs Also See for NYM15W-C100:
Table of Contents

Advertisement

Precautions for Correct Use

Storage, Installation and Mounting

• Do not operate or store the product in the following locations. Operation may stop or malfunctions
may occur.
• Locations subject to direct sunlight
• Locations subject to temperatures or humidity outside the range specified in the specifications
• Locations subject to condensation as the result of severe changes in temperature
• Locations subject to corrosive or flammable gases
• Locations subject to dust (especially iron dust) or salts
• Locations subject to exposure to water, oil or chemicals
• Locations subject to shock or vibration
• Locations outdoors subject to direct wind and rain
• Locations subject to strong ultraviolet light
• Take appropriate and sufficient countermeasures when installing the product in the following loca-
tions
• Locations subject to strong, high-frequency noise
• Locations subject to static electricity or other forms of noise
• Locations subject to strong electromagnetic fields
• Locations subject to possible exposure to radioactivity
• Locations close to power lines
• Always touch a grounded piece of metal to discharge static electricity from your body before starting
an installation or maintenance procedure.
• The backlight has a finite life and if that is exceeded, the product may fail or malfunction. Check the
brightness periodically and if necessary, replace the product.

Wiring

• Always ensure the rated supply voltage is connected to the product.
• Do not use cables exceeding the maximum specified length. Doing so may cause malfunction.
• Do not connect an AC power supply to the DC power connector.
• Never ground the 24 VDC side of the power supply. This may cause a short circuit.

Actual Operation and Operation

• The touchscreen supports 5 simultaneous touches. When the number of touches is exceeded, not
all touch points will be detected.
• The capacitive touchscreen reacts to contact on its surface. Accidental touching the surface of the
touchscreen may cause unintended behavior.
• You can operate the touchscreen even when you wear some gloves. Confirm that you can correctly
operate the touchscreen while wearing gloves prior to actual operation.
NY-series Industrial Monitor User's Manual (W554)
Precautions for Correct Use
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nym15w-c106Nym12w-c100Nym12w-c106

Table of Contents