Table of Contents
Advertisement
(2)
Using Batteries
Important
・Take caution not to insert the batteries in the wrong polarities. The unit may be damaged if
this happens.
・Use two batteries of the same type and model. Do not mix new and used batteries.
Note
・It is recommended that the SLEEP measurement mode is entered when using battery
power supply.
・The AC adapter is used as the primary power source when both AC adapter and batteries
are connected to the unit. The unit automatically switches to the battery source when the
AC power supply is discontinued due to power failure or other reason.
・A power switch is not provided on the unit. The unit starts operation immediately after the
batteries are installed.
・Rechargeable batteries (if they are used) must be charged prior to use. The unit does not
provide a battery charging feature.
(1) Slide the battery cover off the rear side of the
unit.
(2) Mount two batteries to the correct polarities in
the battery compartment.
(3) Slide the battery cover on to close the battery
compartment.
3-4
3. Check and Preparation
Advertisement
Table of Contents
