Table of Contents
Advertisement
(19)
Others (ETC)
Specifies if the unit displays the items for setting file read/write, time setting, and network
setting.
Setting range:
OFF / DISP
Initial value: OFF
Setting Value
OFF
DISP
Note
The ETC setting returns to "OFF" when the unit is reset.
(20)
Reading Setting Data (RESTR)
Restores the unit settings by using the SD memory card with the setting data saved as a
backup using the BCKUP setting (described later).
Operation:
Insert the SD card containing the setting data, and hold the SET/REC/STOP key.
Reading is completed when "DONE" is displayed.
The unit resets itself and restarts when the MODE key is pressed to change the
operation mode.
Note
・Only one setting data item (the setting data for only one unit) can be stored in a single SD
card as a backup. The setting data backed up in one Portable Power Monitor can be
restored on other Portable Power Monitor unit.
・Setting data reading is not possible when ETC is set to "OFF".
The unit does not display the items for setting data read/write, time
setting, network setting, DTAIL, rate/CO2 conversion value setting
and conversion unit setting.
The RNKCL item returns when the ▽ key is pressed after the
setting is applied with the SET/REC/STOP key.
The unit displays the items for setting data read/write, time setting,
network setting, DTAIL, rate/CO2 conversion value setting and
conversion unit setting.
The RESTR item is displayed when the ▽ key is pressed after the
setting is applied with the SET/REC/STOP key.
4-15
4. Setting the Unit (Unit Operation)
Operation
Advertisement
Table of Contents
