Omron ZN-CTX21 User Manual page 21

2. Part Name and Function
Indicator Definition
Display Definition/Function (When Displayed)
An Integral power consumption reset interval is set.
The setting is OFF when this is not displayed.
Communication via LAN cable is in process.
A LAN cable is connected and network communication is ready.
Data is being recorded in the internal memory.
Blinking: The timer is set for the unit to wait for recording start.
An SD memory card is inserted.
Blinking: The SD card is being accessed.
An integral power consumption has exceeded the specified upper
threshold value.
Power is being supplied to the unit.
The battery level is shown in 4 levels. Replace the batteries when this is
blinking.
This indication is not available when the measurement mode (MODE) is
in NORM or HISPD.
Indicates the upper limit threshold value.
Indicates the maximum momentary power value.
Indicates the minimum momentary power value.
Indicates the average momentary power value.
The unit is currently operating in RUN mode.
The unit is currently operating in FUN mode.
The unit is currently operating in FUN mode.
Refer to the Appendix for the definitions of alphabetical, numeric and principal message
displays.
Refer to: Appendix, "Character Display List"
2-2