Table of Contents
Advertisement
・ Remove the batteries when they are not used for a long time.
・ Used batteries remaining installed for a long time may leak and corrode in the product.
・ Do not disassemble or throw the battery into the fire.
・ When the battery level is low, the product may repeatedly restart. If this happens, replace the batteries
with new ones.
・ Use the AC adapter when operating the product through a network, since network connection rapidly
consumes batteries.
4. Battery disposal
・ Battery disposal must follow the guidelines provided by local governments. Dispose of batteries in
compliance with the relevant local regulations.
5. Mounting screw holes
・ The screw holes provided on the product are M3 and 4 mm deep. Do not screw deeper than 4 mm,
which may damage the product.
6. Measurement
・ Provide a distance of 20mm or more between the dedicated CT and the product when the mounting
magnets are used. Otherwise, measurement may be affected by the magnetism and therefore, may not
be correct.
・ Correct settings must be made specifically according to the object to be measured.
・ This product is not categorized as "a specified measuring instrument" officially approved by an
organization specified in relevant measurement acts. Therefore, the measured data provided by this
product cannot be used for official energy certificates.
viii
Advertisement
Table of Contents
