2-3-2. Outside Panel
Required components
. Gasket (rear center): 4-115-172-01 x 1
Procedure
1. Remove the outside panel sub assembly.
(Refer to Section 2-2-21.)
2. Attach the gasket (rear center) at the position
shown in the illustration.
3. Assemble the removed parts by reversing
steps of removal. (Refer to Section 2-2-21.)
PMW-EX3
Location of the prevention components
Gasket
(rear center)
Outside panel
Gasket (rear center)
Gasket (rear center)
Align center.
Push against rib.
2-43