2-4.
Removal and assemblage of front
panel assembly and rear panel
assembly
2-4-1.
Front panel assembly
2-4-2. Rear panel assembly
1. Remove the upper case and two board holders.
1. Remove the upper case and two board holders.
2.
Remove the SG-263, DC-DC converter (PS-567) and
2.
Remove the SG-263, DC-DC converter (PS-567) and
PR-251 boards.
PR-251 boards.
3.
Remove the lower case.
3.
Remove the lower case.
4.
Disconnect the flat cable on the PA-231/246/247 board.
4.
Disconnect the flat cable on CN-1851 board.
5.
Remove the front panel assembly.
5.
Remove the rear panel assembly.
Note:
Do not damage the flat cable.
Note:
Do not damage the flat cable.
2-4 (E)
rew:
Screws
Screws
(P2 x 3)
XC-ST70/ST50/ST30
XC-ST70CE/ST50CE/ST30CE