Replacing The Flexible Card Wires; Replacing The Coaxial Cable With Connector (Fine Pitch Coaxial Cable) - Sony PMW-EX3 Service Manual

1-9. Replacing the Flexible Card Wires

n
The flat cables, flexible card wires and boards are used to
connect between the following boards. Life of flexible card
wire will be significantly shortened if it is folded. Be very
careful not to fold the flat cables, flexible card wires and
boards.
The two types of different shape connectors are used in
this unit.
Because the direction of the flat cables, flexible card wires
and boards are different depending on the shape of the
connector, be careful when connecting the flat cables,
flexible card wires and boards.
Disconnecting
1. Turn off the power.
2. Slide or lift up the portion A in the direction of the
arrow to unlock and pull out the flexible card wire.
Connecting
m
. Do not insert the coaxial cable with connector sideways.
. Confirm that there is no stain or dust on the contact
surface of the coaxial cable with connector.
1. Slide or lift up the portion A in the direction of the
arrow and securely insert the flexible card wire into
the deep end of the connector.
2. Return the portion A to its original position and lock
the connector.
n
When connecting the flexible card wire, check the connec-
tor shape, and great care should be taken for the direction
of the contact surface or isolation surface (blue).
Connector : 1
A
Isolation surface
(blue)
1-16
Connector : 2
Isolation surface
(blue)
A
1-10. Replacing the Coaxial Cable with
Connector (Fine Pitch Coaxial Cable)
The PMW-EX3 uses coaxial cables with connector.
n
The life of the coaxial cable with connector will be signifi-
cantly shortened if it is pulled or bent. Be very careful in
handling.
The following precautions must be observed when remov-
ing or connecting the coaxial cable with connector.
Note on Disconnecting
The coaxial cable with connector uses fine pitch coaxial
cables. Be careful when arranging the cable. When discon-
necting the coaxial cable with connector, do not attempt to
remove by pulling the cable. Be sure to hold the connector
to remove.
Hold the connector to remove.
OK
Do not attempt to remove by pulling
NG
the cables.
PMW-EX3