Board, Swc-48 Board - Sony PMW-EX3 Service Manual

2-2-19. HN-343 Board, SWC-48 Board
1. Refer to Sections from 2-2-1 to 2-2-3, 2-2-5,
2-2-9, 2-2-13 and 2-2-18, and disassemble
the unit up to "HN-344 Board" removal.
2. Remove the tape (LED) fixing the ferrite
core.
3. Remove the two screws (M2 x 4) of a, and
disconnect the HN-343 board from the
connector (CN700) on the SWC-48 board.
4. Remove the tape (SWC48) and ferrite core
from the HN-343 board.
5. Disconnect the harness from the connector
(CN600) on the SWC-48 board. Disconnect
the harness from the bracket (frame/full auto
bracket) in the direction of the arrow.
6. Remove the three tapping screws (2 x 5) of
b and the three screws (M2 x 4) of c, and
remove the SWC-48 board.
PMW-EX3
Inside panel assembly (1)
M2 x 4
(Silver)
c
Inside panel assembly (1)
Screws c
Bracket
(Frame/full auto bracket)
Harness
HN-343 board
Tape
(SWC48)
Ferrite core
CN700
Tape (LED)
M2 x 4 (Silver)
a
b
Tapping
2 x 5
(Black)
CN600
SWC-48 board
2-21