System Requirements; What's In The Box; Hardware Description - NETGEAR N150 WN604 User Manual

System Requirements

Before installing the access point, make sure your system meets these requirements:
A 10/100 Mbps LAN device such as a hub or switch
•
The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
•
package, or one like it
A 100–240 V, 50–60 Hz AC power source
•
A web browser for configuration such as Microsoft Internet Explorer 6.0 or later, or Mozilla
•
3.0 or later
At least one computer with the TCP/IP protocol installed
•
802.11b/g/n-compliant devices
•

What's In the Box

The package contains the following:
Wireless N150 Access Point WN604
•
Ethernet cable
•
Power adapter
•
Vertical stand feet (2)
•
• Installation Guide
• Resource CD
Contact your reseller or customer support in your area if there are any missing or damaged
parts. Keep the original packing materials, and use the packing materials to repack the
access point if you need to return it for repair. To qualify for product updates and product
warranty registrations, we encourage you to register on the NETGEAR website at:
www.NETGEAR.com.

Hardware Description

This section describes the front, rear, and side hardware functions of the access point.
Wireless N150 Access Point WN604
Getting Started
7