Lacp Port Setting - Planet Networking & Communication LRP-822CS User Manual

4.4.5 LACP Port Set
This page is used to configure the LACP port setting. The LACP Port Setting screens in
The pag e include s the following fields:
Object
 Port Select

Priority

Timeout
Buttons
: Click to apply changes.
ting
Figure 4-4-10 LACP Port Setting Page Screenshot
Description
Select port number from this drop-down list to set LACP port setting.
The Priority controls the priority of the port. If the LACP partner wants to form a
larger group than is supported by this device, then this parameter will control
which ports will be active and which ports will be in a backup role.
L ower number means greater priority.
The Timeout controls the period between BPDU transmissions. Short will
transmit LACP packets each second, while Long will wait for 30 seconds before
sending an LACP packet.
Figure 4-4-11 LACP Port Information Page Screenshot
User's Manual of LRP-822CS/LRP-1622CS
109
Figure 4-4-10 & Figure 4-4-11 appear.