Vlan Setting Example; Two Separate 802.1Q Vlans - Planet Networking & Communication LRP-822CS User Manual

4.5.14 VLAN setting
- Separate VLANs
- 802.1Q VLAN Trunk
4.5.14.1 Two Separate 8
T he diagram shows how the LRP Managed Switch handles Tagged and Untagged traffic flow for two VLANs. VLAN Group 2
and VLAN Group 3 are separated VLANs. Each VLAN isolates network traffic so only members of the VLAN receive traffic from
the same VLAN members. The screen in
Managed Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follows:

Untagg ed packet entering VLAN 2
While [PC-1] transmits an untagged packet enters Port-1, the LRP Managed Switch will tag it with a VLAN Tag=2.
1.
[PC-2] and [PC-3] will receive the packet through Port-2 and Port-3.
examp le:
02.1Q VLANs
Figure 4-5-20
Figure 4-5-20 Two Separate VLAN Diag
VID Untagged Members
1
2
3
Table 4-5-2 VLAN and Port Configuration
User's Manual of LRP-822CS/LRP-1622CS
appears and Table 4-5-2 describes the port configuration of the LRP
rams
Port-7~Port-8
Port-1,Port-2
Port-4,Port-5
135
Tagged Members
N/A
Port-3
Port-6