Diagnostics; Cable Diagnostics - Planet Networking & Communication LRP-822CS User Manual

4.13 Diagnostics

This section provid e the Physical layer and I
designed for network manager to help them quickly diagnose problems between point to point and better service customers.
Use the Diagn ostics menu items to display and confi
S ystem the following topics are provided to configure and view the system information:
This section has the following items:


Cable Diagnostics


Ping Test

IPv6 Ping Test

Trace Route
4.13.1 Cable Diagnostics
The Cable Diagnostics performs tests on copper cables. These functions have the ability to identify the cable length and
operating conditions, and to isolate a variety of common faults that can occur on the cat5 twisted-pair cabling. There might be
two statuses as follows:
 If the link is established on the
disruption of the link or of any data transfer.
If the link is established in 100

diagnost ics is running.
After the diagnostics is finished
Coupling between cable pairs.

 Cable pair termination
 Cable length
Cable Diagnost
P layer network diagnostics tools for troubleshoot. The diagnostic tools are
gure basic administrative details of the LRP Managed Switch. Under
twisted-pair interface in 1000BASE-T mode, the Cable Diagnostics can run without
BASE-TX or 1 0BASE-T, the Cable Diagnostics causes the link to drop while the
, the link is re established. And the following functions are availa
ics is only accurate for cables of length from 15 to 100 me
User's Manual of LRP-822CS/LRP-1622CS
317
ble:
ters.