Procedure; Camera Firmware Updates; Firmware Via Linux Or Third Party Tools; I Nstallation - Teledyne m640 User Manual

Installation
Note: to install Sapera LT and the GigE Vision package, logon to the workstation as an administrator or
with an account that has administrator privileges.
When Genie Nano is used in a Sapera development environment, Sapera LT 8.10 (or later)
needs to be installed, which automatically provides all GigE Vision camera support including
TurboDrive.
If no Sapera development is required. Then the Sapera LT SDK is not needed to control the
Linea GigE camera. Sapera runtime with CamExpert provides everything to control the camera.

Procedure

Download and install Sapera LT 8.10 (or later) which automatically provides GigE Vision support
•
with Teledyne DALSA TurboDrive™ technology. Note that Nano features may change when an
older versions of Sapera LT is used.
Optional: If the Teledyne DALSA Sapera LT SDK package is not used, click to install the Genie
•
Nano firmware and user manuals only. Follow the on screen prompts.
Connect the camera to an available free Gigabit NIC that's not part of some other corporate
•
network.
Refer to Sapera LT User's Manual concerning application development with Sapera.
Note: The Teledyne DALSA Sapera CamExpert tool (used throughout this manual to describe Genie Nano
features) is installed with either the Sapera LT runtime or the Sapera LT development package.

Camera Firmware Updates

Under Windows, the user can upload new firmware, using the
by the Sapera CamExpert tool.
Download the latest firmware version released for any Nano model from the Teledyne DALSA
support web page: http://www.teledynedalsa.com/imaging/support/downloads/firmware/

Firmware via Linux or Third Party Tools

Consult your third party GigE Vision software package for file uploads to the connected device.
54 • Using Nano with Sapera API
File Access Control features provided
Nano Series GigE Vision Camera