Sensor Control Feature Descriptions - Teledyne m640 User Manual

Sensor Control Feature Descriptions

The following table describes these features along with their view attribute and device version. For each feature the device version may differ
for each camera sensor available.
When a Device Version number is indicated, this represents the camera software functional group, not a firmware revision number. As Genie
Nano capabilities evolve the device version will increase, therefore identifying the supported function package. New features for a major
device version release will be indicated by
The first column indicates whether a feature applies to monochrome or color camera models via a symbol. No symbol indicates a common
feature. Additionally the description column will indicate which feature is a member of the DALSA Features Naming Convention (indicated by
DFNC), versus the GenICam Standard Features Naming Convention (SFNC tag is not shown).
B/W Display Name
Color
Device Scan Type
Areascan
Sensor Color Type
Monochrome Sensor
Bayer Sensor
Input Pixel Size
8 Bits/Pixel
10 Bits/Pixel
12 Bits/Pixel
Sensor Width
Sensor Height
Acquisition Frame Rate
Control Mode
Programmable
Maximum Speed
Acquisition Frame Rate
66 • Operational Reference
green text for easy identification.
Feature & Values
DeviceScanType
Areascan
sensorColorType
Monochrome
CFA_Bayer
pixelSizeInput
Bpp8
Bpp10
Bpp12
SensorWidth
SensorHeight
acquisitionFrameRateControlMode
Programmable
MaximumSpeed
AcquisitionFrameRate
Description
Defines the scan type of the device's sensor.
Genie Nano is an Areascan camera.
< RO, Beginner >
Device uses an Areascan sensor.
Defines the camera sensor color type.
< RO, DFNC, Beginner >
Sensor color type is monochrome.
Sensor color type is Bayer Color Filter Array (CFA).
Size of the image input pixels, in bits per pixel.
< RO, DFNC, Guru >
Sensor output data path is 8 bits per pixel.
Sensor output data path is 10 bits per pixel.
Sensor output data path is 12 bits per pixel.
Defines the sensor width in active pixels.
< RO, Expert >
Defines the sensor height in active lines.
< RO, Expert >
Set the frame control method used in free running mode. Note that this feature applies only to
sensor acquisitions, not internal test images. < 1.01, DFNC, Guru >
The camera frame rate is controlled by the AcquisitionFrameRate feature.
The camera operates at its maximum frame rate using the current exposure (time and delay)
configuration.
Specifies the camera internal frame rate, in Hz.
Any user entered value is automatically adjusted to a valid camera value. Note that a change in
frame rate takes effect only when the acquisition is stopped and restarted.
< Beginner >
Notes
Nano Series GigE Vision Camera