Output Line Details; Output High And Output Low Block Diagram - Teledyne m640 User Manual

Output Line Details

The general purpose output line signals are connected to I/O lines 3 and 4, which have the
following features for control or status indication.
Feature set: LineInverter (RW), outputLineSource (RW), outputLinePulseDelay (RW),
•
outputLinePulseDuration (RW), outputLineValue (RW), outputLineSoftwareCmd (RW),
LineSelector (RW), LineName (RO), linePinAssociation (RO), LineFormat (RO), LineMode (RO),
LineStatus (RO). See Output Signals Electrical Specifications for more information.
External outputs: Can be used as a strobe signals to control lighting or to generate
•
programmable pulses when specific events are generated by the camera.
Output on Events: Each output can be set independently to one of the available event modes
•
defined by the 'outputLineSource' feature.

Output High and Output Low Block Diagram

Output signal lines when either in the High or Low state are shown in the following figures with an
simplified external circuit.
Camera Output
Nano Series GigE Vision Camera
VCC
LOAD
Examples of Logic HI and Logic LO output circuits
Camera Output
current flow
Operational Reference • 93
VCC
LOAD