Downloading To Cpu - Siemens SIMATIC S7-1500 Function Manual

Downloading to CPU

Description
When downloading to the CPU S7-1500, it is always verified that the project files are
consistent online and offline after the download.
The data of the technology objects are saved in technology data blocks. The conditions for
downloading blocks thus apply when loading new or modified technology objects.
Load in RUN mode
When loading in the CPU's RUN mode, it is checked whether a load without restart of the
technology objects is possible.
If restart-relevant configuration values were changed, then a restart of the technology object
is automatically performed after the load into the CPU.
Loading a technology object is only possible if the technology object is disabled.
You cannot download the following changes to the CPU in RUN mode:
● Changes to the MC-Servo clock speeds
● Changes to the hardware interface of the technology object in "Technology object >
198
Configuration > Hardware interface"
S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
8