Siemens SIMATIC S7-1500 Function Manual page 128
Update 3
Hide thumbs
Also See for SIMATIC S7-1500:
- System manual (523 pages) ,
- Function manual (362 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
Configuring
6.6 Configuring the positioning axis/synchronous axis technology object
Load gear
● Number of motor revolutions / number of load revolutions
The gear ratio of the load gear is specified as the ratio between motor revolutions and
load revolutions. Specify here an integral number of motor revolutions and the resulting
number of load revolutions.
Select the same values for the number of motor revolutions and load revolutions, if no
load gear is present.
Rotary - External Measuring System
An external measuring system provides the position values of the rotary load motion.
Load gear
● Number of motor revolutions / number of load revolutions
The gear ratio of the load gear is specified as the ratio between motor revolutions and
load revolutions. Specify here an integral number of motor revolutions and the resulting
number of load revolutions.
Select the same values for the number of motor revolutions and load revolutions, if no
load gear is present.
Position parameter
● Distance per encoder revolution
● In this field, configure the distance recorded by the external measuring system per
encoder revolution.
128
S7-1500 Motion Control V13 Update 3
Function Manual, 07/2014, A5E03879256-AC
Advertisement
Table of Contents
