Focus Recall - Yamaha CL5 Reference Manual

STEP
1. Press the SCENE field in the Function Access Area.
2. Press the FOCUS tab at the bottom of the SCENE LIST window.
3. In the SCENE LIST window, press the SET button for the scene you want to set.
4. Follow the procedure starting with step 3 in the
(page 73) to make settings.
5. If you want to cancel the specified restrictions so that all parameters will be subject
to recall, turn on the ALL button.
6. Recall a scene for which you have made Focus Recall settings.
SCENE field
NOTE
• The FOCUS field enables you to make settings for the Focus function. The buttons in this field
correspond to the scene list shown on the left side of the SCENE LIST window.
• Scenes for which Focus settings are made are indicated by a "FOCUS" indication in the STATUS
field of the SCENE LIST window.
• You can use the Focus function in conjunction with the Recall Safe function. Channels or
parameters that are excluded from Recall operations by either Focus or Recall Safe will not be
recalled.
• For FOCUS RECALL, the NAME parameter is included in the DCA indicator.
"Using the Recall Safe function"
SCENE LIST window
FOCUS RECALL window
Sets the parameters that will be recalled.
2
3
5
6
8
1
CLEAR ALL button
Clears all the settings.
2
Focus channel display section
Indicates the target channel for a Recall operation. The view of this field is the same as
that in the RECALL SAFE window.
All parameters are affected by Recall on these
Some parameters are affected by Recall on
Recall has been canceled on these channels.
3
SET BY SEL button
Turn on this button to add a channel by using the corresponding [SEL] key. To add
channels as the target, turn on this button, and then press the corresponding [SEL] keys
for the channels you want to add.
NOTE
In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
95
4
1
7
9
0
Scene memory
Reference Manual