Yamaha CL5 Reference Manual page 186

◆ Transport field
Here you can operate the transport of Nuendo Live.
7
GO TO PROJECT START button
Returns the location to the start of the project.
8
GO TO PREVIOUS MARKER button
Returns the location to the previous marker.
9
GO TO NEXT MARKER button
Advances the location to the next marker.
10
GO TO PROJECT END button
Advances the location to the end of the project.
A CYCLE button
Turns repeat on/off for the project.
B
STOP button
Stops playback/recording of the project.
C
PLAY button
Starts playback of the project.
D RECORD button
Starts/stops recording of the project.
E
EASY RECORDING button
Immediately starts recording on all tracks.
When you press this, the location will move to the last-recorded position, all tracks will
be set to record mode, recording will begin, the record panel will be displayed, and the
panel will be locked. The recording will be started
(Default setting: 10 seconds)
F
ADD MARKER button
Adds a marker to the project at the current location.
G
RECALL LINK button
Specifies whether a marker will be created when you recall a scene. If this function is
turned on, the button will be lit.
H
Record lock button
Turns recording status lock on/off. This prevents recording from being accidentally
stopped during recording.
NOTE
Transport functions can also be controlled from USER DEFINED keys
I
DVS information display
Shows the device label of the selected DVS.
retrospectively.
(page 197).
183
Specifying DVS or Dante Accelerator
Before you proceed, use DANTE SETUP to specify the I/O devices that will be mounted. For
"Mounting an I/O device on the Dante audio
details, refer to
STEP
1. In the Nuendo Live screen, press the NUENDO Live SETUP button.
2. In the NUENDO LIVE SETUP screen, press the setting method select button.
3. Use the [TOUCH AND TURN] knob to make settings.
4. When you have finished making settings, press the OK button to close the window.
NOTE
• You can specify either DVS or Dante Accelerator in the NUENDO LIVE SETUP window.
• However, do not select the same DVS or Dante Accelerator from multiple CL series consoles.
NUENDO LIVE SETUP window
In this window, specify the device that the console will use for communication when working
with Nuendo Live.
1
Recorder
(page
network" 231).
Reference Manual