External Ha Port Select - Yamaha CL5 Reference Manual

VIRTUAL RACK screen (EXTERNAL HA page)
5
1
2 3
1
EXTERNAL HA field
This displays the state of the connected external HA.
2
ID/Model name/+48V master
This displays information for the external HA mounted in the rack. The ID number is
automatically assigned in order of the connected devices from 1 to 6. This field also
enables you to view the on/off status of the master phantom power.
3
Virtual racks
These are up to six racks in which remotely controllable external HA units can be
mounted. If an external HA is mounted, this field will indicate the HA settings (GAIN
setting, and on/off status of the phantom power and HPF). Press a rack to open the
EXTERNAL HA window for that rack.
4 EXTERNAL HA PORT SELECT button
Press this button to display the HA PORT SELECT window, in which you can set the input
port for the external head amp mounted in the rack.
NOTE
If an external HA is connected to one of the slots on the CL series console, you must specify an
appropriate input port manually. If this is set incorrectly, the external HA will not be detected
correctly when you patch input ports to input channels.
6
4
5 VIEW switch buttons
Switch the virtual rack display between SB168-ES and AD8HR. Select the view that's
appropriate for the connected device.
6
COMM PORT switch buttons
Specify whether the external HA connected to the slot will be controlled remotely. Select
"SLOT1" if you want to remotely control the external HA.
EXTERNAL HA PORT SELECT window
Select the input port for the external head amp. Display this window by pressing the
EXTERNAL HA PORT SELECT button in the I/O DEVICE screen (EXTERNAL HA page).
1
1
PORT SELECT buttons
Specify the input ports to which the external HA is connected.
163
I/O devices and external head amps
Reference Manual