Yamaha CL5 Reference Manual page 225

• DIMMER (MONITOR screen) operations
• Panel LED and display brightness (SETUP screen) operations
• Master mute group operations
3 CASCADE COMM PORT buttons
Specify the communication port used for transmitting and receiving link information
when cue operations or scene store/recall operations are linked on the CL series consoles
in a cascade connection.
• NONE.....................No link operation
• MIDI........................Use MIDI port
• SLOT1 ....................Use SLOT1
4
Tabs
Enable you to switch between items.
PORT SELECT window
Press the OUT PATCH button to open this window.
1
1
Slot select list
This list selects slots 1-3.
2
Port select buttons
These buttons select the port of the specified slot.
Operations on the cascade master CL unit
STEP
1. In the Function Access Area, press the SETUP button.
2. In the SYSTEM SETUP field of the SETUP screen, press the CASCADE button.
3. In the CASCADE window, press the CASCADE IN PATCH tab.
4. In the CASCADE IN PATCH page, press the IN PATCH button for the bus to which you
want to assign the port.
5. In the PORT SELECT screen, use the slot select list and the port select buttons to
select the slot and input ports that you want to assign, and then press the CLOSE
button.
6. As described in step 6 of
CASCADE LINK PORT field, select the port that will transmit and receive control
signals for cascade link.
7. As described in step 7 of
CASCADE COMM LINK field, select the same item as the cascade slave.
NOTE
• You can assign the same input port to two or more buses.
• Control signals for the cascade link and MIDI messages cannot share the same port. If you select
a port that is already specified for transmission/reception of MIDI messages, a dialog box will ask
whether it is OK to cancel the existing settings.
2
222
"Operations on a cascade slave CL unit"
"Operations on a cascade slave CL unit"
Setup
(page 221), in the
(page 221), in the
Reference Manual