Yamaha CL5 Reference Manual page 203

FUNCTION PARAMETER 1 PARAMETER 2
Portico5033 LIBRARY
Portico5043 LIBRARY
U76 LIBRARY
PREMIUM RACK
Opt-2A LIBRARY
LIBRARY
EQ-1A LIBRARY
DynamicEQ LIBRARY
Buss Comp 369 LIBRARY
INPUT PATCH
OUTPUT PATCH
INPUT INSERT PATCH
PATCH EDITOR
OUTPUT INSERT PATCH
DIRECT OUT PATCH
PATCH LIST
RACK
GEQ 1-16
EDITOR
EFFECT 1-8
CONTROL
PREMIUM 1A
RACK EDITOR
PREMIUM 1B
:
PREMIUM 8A
PREMIUM 8B
INPUT METER
METER
OUTPUT METER
DCA GROUP
MUTE GROUP
GROUP/LINK
CHANNEL LINK
OUTPUT CHANNEL LINK
SCENE MEMORY
RECALL SAFE
SCENE
Fade time
FOCUS RECALL
EFFECT RACK1-8 -
PREMIUM RACK1A -
PREMIUM RACK1B -
EFFECT
BYPASS
: -
PREMIUM RACK8A -
PREMIUM RACK8B -
FADER BANK
- -
SNAPSHOT
Description
Access the corresponding screen of CL Editor.
Turns BYPASS for each RACK on and off. Lit
when ON.
Takes a snapshot of the bank settings for all A, B,
and C blocks (hold down the key for two
seconds or longer), or displays the last bank for
which a snapshot was taken (press and release
the key within two seconds).
200
FUNCTION PARAMETER 1 PARAMETER 2
LATCH -
GAIN KNOB
FUNCTION
UNLATCH -
INC
GEQ FREQ
-
BANK
DEC
LATCH
GPI OUT PORT1-PORT5
UNLATCH
HELP - -
SELECTED CH VIEW -
OVERVIEW -
HOME
TOGGLE -
PEAK HOLD ON -
METER
SURROUND METER -
PROGRAM CHANGE PGM 1-128
CONTROL CHANGE CC 1-31, 33-95, 102-119
MIDI NOTE ON C-2 (0)
NOTE ON :
NOTE ON G 8 (127)
OUTPUT -
SELECTED CH ASSIGN -
MONITOR
DIMMER ON -
Setup
Description
Toggle the function of the GAIN knob (ANALOG
GAIN/DIGITAL GAIN). Lit when DIGITAL GAIN is
selected.
It goes OFF when the bank is switched.
Assign the function of the GAIN knob (ANALOG
GAIN/DIGITAL) to DIGITAL GAIN only while
held down.
* However if the GAIN KNOB FUNCTION is
switched to DIGITAL GAIN in the PREFERENCE
screen etc., this will remain lit until the next
time it is pressed.
It goes OFF when the bank is switched.
Adds or removes a frequency bank in the GEQ
EDIT screen.
Toggle the GPI OUT function. Lit when active.
Make GPI OUT active only while pressed.
Opens and closes the HELP window. Operating
the controllers on the panel (excluding faders),
or controllers on the screen, while holding
down this key will display the related
information.
Displays the SELECTED CHANNEL VIEW screen.
Displays the OVERVIEW screen.
Each press of the key will alternately display the
SELECTED CHANNEL VIEW screen and the
OVERVIEW screen.
Turns the meter's peak hold function on/off. Lit
when ON.
For Surround mode, toggle between the
content to be shown in meters displayed in the
Function Access Area. The lamp is off for MIX 1-
6, and on for SURROUND MONITOR.
Transmit the corresponding MIDI message.
For NOTE ON, it goes OFF when the bank is
switched.
Switch the monitor output on/off.
While holding down this key, press the SEL key
of a MIX or MATRIX channel to switch the
assignment on/off. During this time, the [SEL]
LED will be lit if assign is ON, or dark if OFF.
The assignment setting made while holding
down this key will be stored. Pressing the key
again will recall the stored setting. Settings can
be stored in multiple keys to facilitate rapid
assignment switching.
It goes OFF when the bank is switched.
Enable the dimmer and attenuate the monitor
signal.
Reference Manual