Delay Scale - Yamaha CL5 Reference Manual

INPUT DELAY (CH 1-48, CH 49-72/ST IN (CL5),
CH 49-64/ST IN (CL3), ST IN (CL1))
2
3
1
DELAY SCALE button
Press the button to display the DELAY SCALE window, in which you can select the unit
for the delay time.
2
Channel select button
Lights to indicate the currently-selected input channel. Press the button to select the
channel.
3
Delay setting knob (input channels only)
Press this knob to adjust the value using the multifunction knob. You can view the
current value immediately above the knob (always shown in unit of ms) and below the
knob (shown using the currently-selected scale).
NOTE
If ms (millisecond) has been selected for the DELAY SCALE, nothing will appear to the right of
the knob.
1
Additional functions for stereo input channels
With V3, you can temporarily set the signals sent to a stereo input channel as mono. You can
select from the following three settings.
◆ L-MONO
Only the L channel is temporarily set as a mono signal.
STEREO IN Lch
STEREO IN Rch
Only the R channel is temporarily set as a mono signal.
STEREO IN Lch
STEREO IN Rch
42
STEREO L
STEREO R
ON PAN/BAL
ON PAN/BAL
◆ R-MONO
STEREO L
STEREO R
ON PAN/BAL
ON PAN/BAL
Input channels
Reference Manual