Yamaha CL5 Reference Manual page 254

Message
Loading Aborted.
Loading from USB flash drive was aborted.
Loading Finished. Finished loading from USB flash drive.
Low Battery! The backup battery voltage is low.
Maximum Number of Audio Files The number of songs that can be managed by the USB memory
Exceeded! recorder has been exceeded.
Memory Error.
The R series backup memory is corrupted.
MIDI: Data Framing Error!
An inappropriate signal is being input to the MIDI input port.
MIDI: Data Overrun!
MIDI: Rx Buffer Full! Too much data is being received at the MIDI input port.
MIDI: Tx Buffer Full!
Too much data is being transmitted from the MIDI output port.
Monitor Assignment is Restricted to The Monitor Define function allows a maximum of eight sources to be
Max. 8 Sources!
selected, but you attempted to assign more than eight.
In the RECORDER screen, it is not possible to move to a level higher
No Access From Recorder!
than \YPE\SONGS\.
A copy-source channel was not selected in the GLOBAL PASTE
No Channel Selected.
screen.
In the GLOBAL PASTE screen, you attempted to paste without having
No Copy Item Selected.
selected an item to paste.
No Corresponding Help Items.
The corresponding section was not found in the Help file.
No ID3 Tag exists. You can not edit. The music file cannot be edited because it has no ID3 tag.
No Response from External HA. No response from an external AD8HR.
No Response from I/O DEVICE.
The I/O devices not responding.
Operating as the word clock master. This console is the Clock Master.
Page Bookmarked. The current screen or popup has been bookmarked.
Some data could not be loaded because the parameters do not
Parameter out of range!
match.
Password Changed. The password has been changed.
Audio file link playback is not possible because recording is in
PlayBack Failed: Recorder is Busy!
progress.
CUE was canceled for PLAYBACK OUT because you switched from
PLAYBACK OUT CUE: Turned Off.
the RECORDER screen to another screen.
Please use Dante Controller. The Dante Patch settings from the console are not valid.
Please wait, Dante patch is proceeding
You attempted to edit in the DANTE PATCH screen at a time when
now. patching was not possible.
The cooling fan of the internal power supply has stopped. Please
Power Supply Fan has Malfunctioned!
contact your Yamaha service center listed at the end of the Owner's
Manual (separate document).
PREVIEW Mode : Cannot Use This The operation was ignored because this function cannot be used
Function. during Preview.
PREVIEW Mode : Disabled Preview was disabled.
PREVIEW Mode : Enabled Preview was enabled.
Meaning
251
Message
Processing Aborted.
Processing was interrupted.
The button operation was canceled because recorder processing
Recorder Busy: Operation Aborted!
required time.
RECORDER: CODEC Error [0x%08X] ! A codec error occurred in the RECORDER screen.
CUE was canceled for RECORDER IN because you switched from
RECORDER IN CUE: Turned Off.
the RECORDER screen to another screen.
When specifying the user password, the password was not entered a
Re-Enter Password!
second time.
REMOTE: Data Framing Error!
Invalid signals are being input to the Remote connector.
REMOTE: Data Overrun!
REMOTE: Rx Buffer Full! Too much data is being received at the Remote connector.
REMOTE: Tx Buffer Full! Too much data is being sent from the Remote connector.
Removed from the Channel Link group.
The channel was removed from the link group.
Saving Aborted. Saving to the USB flash drive has been interrupted.
Saving Finished. Finished saving to USB flash drive.
No data has been stored in the scene you attempted to recall, or the
SCENE #xxx is Empty!
data has been damaged so that it cannot be recalled.
SCENE #xxx is Protected! You attempted to overwrite (store) a protected scene.
SCENE #xxx is Read Only! You attempted to overwrite (store) a read-only scene.
Scene Playback Link Canceled! The audio playback link for the scene was canceled.
SLOT x: Data Framing Error!
Invalid signals are being input to the SLOT x input port.
SLOT x: Data Overrun!
SLOT x: Rx Buffer Full! Too much data is being received at the SLOT x input port.
SLOT x: Tx Buffer Full! Too much data is being transmitted from the SLOT x output port.
Some songs were not identified. Songs that have not been specified
Some Song Files Are Unidentified.
might be used for DIRECT PLAY or SCENE PLAY BACK LINK.
The file specified for SCENE LINK or DIRECT PLAY assigned to a
Song File Not Found!
USER DEFINED key does not exist.
STAGEMIX: Data Framing Error!
Invalid signals are being exchanged with StageMix.
STAGEMIX: Data Overrun!
STAGEMIX: Rx Buffer Full! Too much data is being received at the StageMix input port.
STAGEMIX: Tx Buffer Full! Too much data is being transmitted from the StageMix output port.
STEREO Mode : Cannot Use This
You cannot use this function in Stereo mode.
Function.
STEREO MODE ON. The console has switched to Stereo mode.
The file could not be saved because there is insufficient space on the
Storage Full!
USB flash drive.
Storage Not Found! The USB flash drive could not be recognized.
Storage Not Ready!
Access is not possible because the USB flash drive is not ready.
SURROUND Mode : Cannot Use This
You cannot use this function in Surround mode.
Function.
Warning/Error Messages
Meaning
Reference Manual