Correcting Delay Between Channels (Output Delay) - Yamaha CL5 Reference Manual

Correcting delay between channels (Output Delay)

This Output Delay function is useful when you want to correct the timing of output signals sent
to speakers that are located at a distance from each other.
STEP
1. In the Function Access Area, press the SETUP button.
2. Press the OUTPUT PORT button in the SYSTEM SETUP field located in the center of the
SETUP screen.
3. Specifies the delay time, and turns on the DELAY button.
SETUP screen OUTPUT PORT screen
OUTPUT PORT screen
1
3
4
5
6
7
8
9
0
If an output channel of slot 1 - 3 is selected for operations, this shows the slot number
and the type of I/O card installed in that slot.
Press this button to open the DELAY SCALE window, in which you can select the unit for
the delay time.
This is the type and number of the output port to which the channel is assigned.
Enables you to select the channel that you want to assign to the output port. The name
of the currently-selected channel is displayed.
Sets the delay time of the output port. Press this knob to select it, and then use
multifunction knobs 1 - 8 to adjust the settings. The millisecond delay time value is
indicated above the knob, and the delay time value in the units selected in the DELAY
SCALE window is indicated below the knob.
NOTE
If the scale is set to ms, the delay time value is not shown above the knob.
57
2
1
Slot number/Card type
2 DELAY SCALE button
3
Output Port
4
Channel select button
5
Delay time knob
OUTPUT channels
Reference Manual